The jaw crusher consists of two jaw plates, a moving jaw and a static jaw, forming a crushing chamber. It simulates the movement of the two jaws of an animal to complete the material crushing operation.
It is widely used in the coarse and medium crushing of various ores and bulk materials in the mining and smelting, building materials, highways, railways, water conservancy and chemical industries. It has a simple structure, is easy to maintain and works reliably.
Often used for primary crushing
After treatment
limestone,dolomite, gypsum, calcium carbonate, phosphorite and so on.
After treatment
river stone, granite, quartz, iron ore, gold mine and other metal mine.
After treatment
concrete, construction waste, glass, cement clinker and so on.
| Model | HJ SERIES JAW CRUSHER | CJ SERIES EUROPEAN TYPE JAW CRUSHER | HDX SERIES GERMAN TYPE JAW CRUSHER | PE/PEX JAW CRUSHER |
| Maximum feeding size (mm) | 1040 | 1200 | 900 | 1200 |
| Processing capacity (t/h) | 150-1160 | 105-1435 | 50-750 | 1-1200 |
| Output adjustment | No downtime required, direct adjustment | Downtime adjustment | ||
| Lubrication system | Centralized hydraulic lubrication is more convenient and saves labor | Manual lubrication | ||
| Advantage | Easier to discharge, less prone to blockage, deep crushing chamber, no dead corners, high efficiency, impact resistance and long service life | Simple structure and easy to repair and maintain | ||
| Cost | Low cost per ton of material crushing | Low production and construction costs | ||
To give you peace of mind
Our jaw crushers have been exported to more than 130 countries, such as the Philippines, Yemen, Ukraine, Russia, Egypt, Indonesia, Malaysia, Switzerland, the United Kingdom, Ethiopia, South Africa, etc. In addition, we provide you with 100% ex-factory price and maximum discount.
If you are a novice in this industry, we will provide you with professional advice and personalized production and processing solutions.
| Model | Feed opening (mm) |
Maximum feeding size (mm) |
Adjust range of discharge opening (mm) |
Processing capacity (t/h) |
Power (kW) |
Dimensions (L×W×H) (mm) |
| HJ411 | 1045×840 | 700 | 75-225 | 150-565 | 6P 110 | 3640×2470×2660 |
| HJ412 | 1200×830 | 690 | 75-275 | 165-790 | 6P 132 | 3682×2620×2765 |
| HJ612 | 1200×1100 | 880 | 125-275 | 300-805 | 6P 160 | 4500×2650×3700 |
| HJ613 | 1300×1130 | 900 | 125-300 | 330-960 | 6P 160 | 4700×2750×3990 |
| HJ615 | 1500×1070 | 860 | 125-300 | 385-1085 | 6P 200 | 4800×3000×3620 |
| HJ815 | 1500×1300 | 1040 | 150-300 | 480-1160 | 6P 200 | 5700×3000×4430 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Feed opening (mm) |
Maximum feeding size (mm) |
Processing capacity (t/h) |
| HJ411 | 1045×840 | 700 | 150-565 |
| HJ412 | 1200×830 | 690 | 165-790 |
| HJ612 | 1200×1100 | 880 | 300-805 |
| HJ613 | 1300×1130 | 900 | 330-960 |
| HJ615 | 1500×1070 | 860 | 385-1085 |
| HJ815 | 1500×1300 | 1040 | 480-1160 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Maximum Feeding size（mm） | Feeding opening size L×W（mm） | Adjustment range of discharge port（mm） | Capacity（t/h） | Power（KW） | Dimensions L×W×H（mm） |
| CJ96 | 480 | 930×580 | 60-175 | 105-390 | 4P 90 | 2850×2270×1950 |
| CJ106 | 560 | 1060×700 | 70-200 | 150-500 | 4P 110 | 3280×2580×2400 |
| CJ120 | 700 | 1200×870 | 70-200 | 175-610 | 4P 160 | 3700×2790×2950 |
| CJ125 | 760 | 1250×950 | 100-250 | 270-831 | 4P 160 | 4230×2780×2960 |
| CJ150 | 960 | 1400×1200 | 125-250 | 340-880 | 4P 200 | 5030×3440×3970 |
| CJ160 | 960 | 1600×1200 | 150-300 | 430-1145 | 4P 250 | 5780×3460×3580 |
| CJ200 | 1200 | 2000×1500 | 175-300 | 630-1435 | 6P 400 | 6600×4030×4400 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Maximum Feeding size（mm） | Capacity（t/h） |
| CJ96 | 480 | 105-390 |
| CJ106 | 560 | 150-500 |
| CJ120 | 700 | 175-610 |
| CJ125 | 760 | 270-831 |
| CJ150 | 960 | 340-880 |
| CJ160 | 960 | 430-1145 |
| CJ200 | 1200 | 630-1435 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Feeding opening size(mm) | Maximum feeding size （mm） | Adjustment range of discharge port（mm） | Processing capacity(t/h) | Power(kw) | Dimensions L×W×H（mm） |
| HDX72(57) | 720×460 | 425 | 45-100 | 50-120 | 6P 55 | 2450×2160×1615 |
| HDX86(69) | 860×580 | 500 | 50-150 | 60-280 | 8P 75 | 3005×2392×1780 |
| HDX98(751) | 980×680 | 630 | 75-175 | 110-410 | 8P 110 | 3372×2530×2145 |
| HDX110(912) | 1100×850 | 750 | 100-200 | 170-550 | 6P 132 | 3592×2670×2515 |
| HDX125 | 1250×950 | 900 | 125-225 | 280-750 | 8P 160 | 4214×2810×2887 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Feeding opening size(mm) | Maximum feeding size （mm） | Processing capacity(t/h) |
| HDX72(57) | 720×460 | 425 | 50-120 |
| HDX86(69) | 860×580 | 500 | 60-280 |
| HDX98(751) | 980×680 | 630 | 110-410 |
| HDX110(912) | 1100×850 | 750 | 170-550 |
| HDX125 | 1250×950 | 900 | 280-750 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Feed opening size(mm） | Max.Feeding size (mm) | Adjustment range of discharge port (mm) | Capacity(t/h) | Rotation speed of eccentric shaft(r/min) | Power (kw) | Dimensions（L×W×H） (mm) |
| PE 150×250 | 150×250 | 125 | 10-40 | 1-3 | 268 | 4P 5.5 | 760×700×860 |
| PE 200×300 | 200×300 | 180 | 15-50 | 2-6 | 260 | 4P 7.5 | 915×780×990 |
| PE 200×350 | 200×350 | 180 | 18-60 | 3-10 | 276 | 4P 11 | 1000×914×1112 |
| PE 250×400 | 250×400 | 210 | 20-70 | 5-21 | 300 | 6P 15 | 1100×1032×1285 |
| PE 400×600 | 400×600 | 340 | 40-100 | 16-64 | 270 | 6P 30 | 1623×1736×1615 |
| PE 500×750 | 500×750 | 425 | 50-100 | 40-110 | 268 | 6P 55 | 1920×1850×1920 |
| PE 600×750 | 600×750 | 500 | 150-200 | 80-240 | 268 | 6P 55 | 2020×1850×1920 |
| PE 600×900 | 600×900 | 500 | 65-160 | 50-160 | 254 | 6P 55 | 2530×1900×2340 |
| PE 750×1060 | 750×1060 | 630 | 80-180 | 110-320 | 245 | 8P 110 | 2680×2380×2785 |
| PE 900×1200 | 900×1200 | 750 | 100-200 | 220-380 | 208 | 8P 110 | 3470×2876×3330 |
| PE1200×1500 | 1200×1500 | 1020 | 150-350 | 400-1000 | 180 | 8P 160-245 | 4850×3220×3680 |
| PE1500×1800 | 1500×1800 | 1200 | 220-350 | 500-1200 | 180 | 8P 280-380 | 5160×3660×4248 |
| PEX 150×750 | 150×750 | 120 | 18-48 | 8-25 | 320 | 4P 15 | 1170×1575×1030 |
| PEX 250×750 | 250×750 | 210 | 25-60 | 13-35 | 320 | 6P 22 | 1550×1730×1470 |
| PEX 250×1000 | 250×1000 | 210 | 25-60 | 16-52 | 330 | 6P 30 | 1580×2006×1390 |
| PEX 250×1200 | 250×1200 | 210 | 25-60 | 20-61 | 330 | 6P 37 | 1780×2214×1430 |
| PEX 300×1300 | 300×1300 | 250 | 20-90 | 16-105 | 300 | 6P 55 | 2210×2320×1723 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Max.Feeding size (mm) | Capacity (t/h) |
| PE 150×250 | 125 | 1-3 |
| PE 200×300 | 180 | 2-6 |
| PE 200×350 | 180 | 3-10 |
| PE 250×400 | 210 | 5-21 |
| PE 400×600 | 340 | 16-64 |
| PE 500×750 | 425 | 40-110 |
| PE 600×750 | 500 | 80-240 |
| PE 600×900 | 500 | 50-160 |
| PE 750×1060 | 630 | 110-320 |
| PE 900×1200 | 750 | 220-380 |
| PE 1200×1500 | 1020 | 400-1000 |
| PE 1500×1800 | 1200 | 500-1200 |
| PEX 150×750 | 120 | 8-25 |
| PEX 250×750 | 210 | 13-35 |
| PEX 250×1000 | 210 | 16-52 |
| PEX 250×1200 | 210 | 20-61 |
| PEX 300×1300 | 250 | 16-105 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
40 years of development
Sold to more than 160 countries
More than 2,300 employees
Covering an area of 500,000 square meters
